SVAT Electronics CVP800 - Manual (Page 12)

w w w . s v a t . c o m
page 12
SD CARD MAINTENANCE
1. The device supports only FAT 16/32 file system; therefore it is unable to determine other file
systems. Please format the SD card (Enter MENU/SD CARD OPTIONS and select “Format”).
2. The system supports only partial SD card file system repair. The system is unable to detect
any file system damage, therefore please format the SD card (Enter MENU/SD CARD
OPTIONS and select “Format”).
HOW TO DOWNLOAD THE UPDATED SOFTWARE
1. Use the SD card to update your system firmware.
2. Please follow the steps below to update the software:
(1) Copy the new system firmware into the new directory of the SD card from your
computer.
(2) Insert the SD card; switch off the main power and then restart.
(3) Wait for 5 to 6 seconds, the system update will be completed and return back to
live mode.
IMPORTANT
Do not withdraw the SD card while booting, when power-loss occurs while
proceeding step (3), please repeat step (2) and (3).
MAIN MENU
(1) Main Menu: Item subject.
(2) Menu Layer Indication: The device consists of three menu layers.
First Menu Layer (Main Menu)
Second Menu Layer
Third Menu Layer
(3) Menu Content: Basic Menu Operations.
Press or button, to move the highlight bar and the cursor
Press MENU/ENTER button, to enter the sub menu.
Press STOP button.
Under second or third menu layer, the system will return to the previous
menu layer (second layer to first layer or third layer to second layer).
Under main menu (first menu layer), the system will enter live mode.
Press or button, to increase or decrease the setting values that
has been highlighted.
M A I N M E N U
¡½
Z
S E A R C H A N D P L A Y >
S E T D A T E / T I M E >
S E T M O T I O N D E T E C T >
M A N U A L R E C O R D >
S C H E D U L E R E C O R D >
S D C A R D O P T I O N S >
S Y S T E M S T A T U S >
F A C T O R Y D E F A U L T >
1 2
3
Z
OPERATION CONTINUED & MENU SETUP
¡½
¡½¡½
¡½¡½¡½