SVAT Electronics CVP800 - Manual (Page 10)

w w w . s v a t . c o m
page 10
4. The event status is determined by the system recording, and according to the order of
priority.
5. The order of priority: Manual Record, Motion Detection and then Schedule Record.
6. Different recording modes may have different kinds of setups. Basic setup: video size,
recording frames, video quality, and audio recording. When different recording modes
are triggered, they system starts recording according to the different setup. This kind of
design provides flexibility to ensure efficient recording time and quality. Example:
Work hour from 8:00 am to 6:00pm, setup schedule record to low video quality with less
recording frames to extend the recording time. And off work hour, setup Motion
Detection Record to enable high video quality with the highest recording frames, when
an event occurs.
7. Video or audio may be recorded in the SD card (SD card not included). When the video
has been stored, the record LED flashes indicates that the system is currently loading the
file into the SD card.
IMPORTANT
Do not withdraw the SD card while recording. It may destroy the data stored within the
SD Card.
Power loss during recording results incomplete video or errors.
Video loss during recording, the system stops recording, backups the files, and when the
videos are normal again, the system will continue recording.
Playback Mode
Selectable Playback format: Continuous Playback and Searching Playback
1. NORMAL PLAYBACK:
Press Play and Pause buttons to playback according to the SD card file order
recorded.
Normal speed playback
Fast Rewind and Fast Forward
(Speed: x2/x4/x8/x16/x32)
Press Play Pause button to return
to normal speed playback.
During playback, press
Play Pause button to pause
playback and press it twice to
return to playback status.
During pause, press buttons to step back one frame or to step forward one
frame and press Play/ Pause buttons to return to normal speed playback.
Switch to Hide Status Info, Hide LCD Monitor and Display LCD Monitor and
Status Info.
Press Stop button to stop playback function and to return to live status.
2 0 0 4 / 0 2 / 0 1 0 8 : 1 0 : 0 3
‘
Display
OPERATION CONTINUED