Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 51)

49
Control Hexadecimal Function TM- TM-
Codes Codes U200 U300
R 1B 52 Selects international character set OK OK
U 1B 55 Selects/cancels unidirectional OK OK
printing mode
V 1B 56 Designates/cancels 90° character
rotation
a 1B 61 Aligns position OK
c 3 1B 63 33 Selects the paper-end sensor for OK OK
sending the no-paper signal
c 4 1B 63 34 Selects the paper-end sensor for OK OK
stopping printing
c 5 1B 63 35 Enables/disables control panel switches OK OK
d 1B 64 Prints or feeds n lines OK OK
e 1B 65 Prints or reverse feeds n lines OK OK
i 1B 69 Full-cut command to the auto cutter OK
m 1B 6D Partial-cut command to the anto cutter OK
p 1B 70 Generates specified pulse OK OK
r 1B 72 Selects print color OK
t 1B 74 Selects character code table OK OK
u 1B 75 Sends peripheral status OK
v 1B 76 Sends paper sensor status OK
{ 1B 7B Enables/disables inverted printing OK OK
I 1D 49 Sends printer ID OK
V 1D 56 Cut command to the auto cutter OK
a 1D 61 Enables/disables automatic status OK
r 1D 72 Sends printer status OK
z 0 1D 7A 30 Setting of on-line recovery wait time OK