Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 26)

24
FUNCTION Sets vertical tab stops
CODE "B" n1 n2 ...nk <0>
(1B)H (42)H n1 n2 ...nk (00)H
DEFINITION RANGE 1
<
=
n1
<
=
n2
<
=
n3 ... < nk
<
=
255
<
=
1
<
=
k
<
=
16
OUTLINE Cancels all current vertical tab stops and sets new vertical tab
stops at lines n1, n2, etc. where n1, n2, etc. are numbers
between 1 and 255. A maximum number of 16 vertical tab
positions can be set. Tab positions must be specified in
ascending order; any violation of ascending order terminates the
tab position list. Standard termination is by the <0> control code.
Vertical tab positions are set in terms of the current line spacing
and do not move if the line spacing is changed later.
NOTE If a tab set position is equivalent or smaller than just
preceding the tab set position, setting of vertical tab is assumed
as complete.