Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 34)

32
FUNCTION Controls peripheral device #1 immediately
CODE
(1C)H
OUTLINE Executes drive pulse for peripheral unit 1 (immediate).
This code differs from the code as follows:
When the printer receives an code, the command is
executed immediately. The code is stored in the data
buffer in the same manner as other codes, and executed in the
order in which they are received.
Immediate drive command for peripheral unit 2
NOTE Peripheral Units 1 and 2 cannot be driven simultaneously.
FUNCTION Controls peripheral device #2 immediately
CODE
(19)H
OUTLINE Drives peripheral unit 2. Pulse width is fixed at 200 ms with a
fixed delay time of 200 ms.
When the printer receives a code, the command is
executed immediately. Same as .
NOTE Peripheral Units 1 and 2 cannot be driven simultaneously.
FUNCTION Controls peripheral device #2 immediately
CODE
(1A)H
OUTLINE Drives peripheral unit 2. Pulse width is fixed at 200ms with a fixed
delay time of 200 ms.
When the printer receives a code, the command is
executed immediately. Same as
NOTE Peripheral Units 1 and 2 cannot be driven simultaneously.