Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 50)

48
2. ESC/POS Mode Commands
The following table lists the TM-U200 and TM-U300 emulation commands that
are supported by this printer.
2-1. Control Codes List
Control Hexadecimal Function TM- TM-
Codes Codes U200 U300
09 Horizontal tab OK OK
0A Line feed OK OK
0D Prints and carriage return OK OK
10 04 Enables real-time status send OK
10 05 Real-time request to printer OK
SP 1B 20 Sets size of space to right of character OK OK
! 1B 21 Enables batch print mode OK OK
# 1B 23 Sets memory switch
% 1B 25 Enables/disables download OK OK
character set
& 1B 26 Defines download character OK OK
* 1B 2A Selects bit image mode OK OK
- 1B 2D Selects/cancels underlining OK OK
2 1B 32 Selects 1/6-inch line spacing OK OK
3 1B 33 Selects n/144-inch line spacing OK OK
= 1B 3D Selects peripheral device OK
? 1B 3F Cancels download character OK OK
@ 1B 40 Initializes the printer OK OK
D 1B 44 Sets horizontal tab position OK OK
E 1B 45 Enables/disables emphasized mode OK OK
G 1B 47 Enables/disables double-strike mode OK OK
J 1B 4A Prints and n/144-inch paper feed OK OK
K 1B 4B Prints and n/144-inch reverse paper feed OK OK