Sirius Satellite Radio PowerConnect XMP3IVKUG0210 - Manual (Page 43)

43
Option 3: PowerConnect Installation Instructions
1 Insert the dock into the mount .
2 Insert your Satellite Radio into the
dock .
3 Power on your Radio sliding the
Power/Lock switch down .
4 Be sure the vehicle is outside and
the antenna has a clear view of the
sky . Verify that you are receiving the XM signal .
There should at least be one bar on the main
display screen that denotes antenna signal
strength . You can also refer to the User Guide
which accompanied your radio, and display
the Antenna Aiming screen . The Satellite
and Terrestrial bars show
the strength of the signal
being received . If the signal
reception is good, repeatedly
press back to return to the
main display screen . You
are ready to make the audio
connection .
5 You’ll now need to find
an available FM channel
to listen to the XM audio
ANT FM AUDIO PWR