Sirius Satellite Radio PowerConnect XMP3IVKUG0210 - Manual (Page 42)

42
Vehicle Installation
and Terrestrial bars show the strength of
the signal being received . If the signal
reception is good, repeatedly press back to
return to the main display screen .
7 Ensure your Radio is tuned to channel 1 .
Upon power up, your Radio should tune
to channel 1 by default, when it’s not yet
activated . If it’s not on channel 1, refer to
the User Guide which accompanied your
Radio to learn about how to tune a channel .
8 If you haven’t done so, turn on your
vehicle’s stereo system . Set it to play input
from the cassette source .
9 You should hear XM channel 1 through your vehicle’s stereo system .
Now sit back and enjoy your favorite programming on SIRIUS|XM
Satellite Radio!
10 The audio level output of the Radio can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle .
Refer to the User Guide which accompanied your Radio for instructions .
If the signal reception is good, but there is no audio when tuned to channel 1, be
sure the vehicle’s stereo system is set to the correct source, i .e ., cassette source
(step 8) . Also be sure that the audio level is set high enough to be heard (step 10) .
Refer to “Troubleshooting” on page 58 for additional help .