Sirius Satellite Radio PowerConnect XMP3IVKUG0210 - Manual (Page 17)

17
3 The dock mounting plate can be tilted in different directions .
Adjust as necessary for your particular vehicle . When the
orientation is correct, tighten the knob .
4 Clean the surface with the
Alcohol Preparation Pad and
let it dry thoroughly .
5 Peel off the adhesive liner .
Position, press, and hold the
Dash Mount in place for 30
seconds .
IMPORTANT! Allow the Dash Mount adhesive to cure (dry) for at least 24
hours before using the mount .
TIP! To remove, carefully lift the adhesive pad with your fingers or a spoon .
Warming the pad with a hair dryer for several minutes will help soften the
adhesive . Be careful not to overheat the surface with the hair dryer or you
may damage the surface or Dash Mount .
Knob Adhesive Foot Dock Mounting Plate