Smart Technologies SMART Board 800i5-SMP - Manual (Page 79)

Submenu setting Description
Read-Only Community Sets a password that is required for each SNMP get request to
the device.
N
N O T E
The default for Read-Only Community is public.
Read/Write Community Sets a password that is required for each SNMP set request to the
device.
N
N O T E
The default for Read/Write Community is private.
Trap Destination Address Displays or allows you to set the IP address of the network’s SNMP
TRAP manager in values between 0.0.0.0 and 255.255.255.255. The
trap destination address is the IP address of the computer assigned to
handle unsolicited data generated by SNMP TRAP events generated
by the projector, such as power state changes, projector failure
modes, a lamp needing to be replaced or other issues.
A P P E N D I X A
Remotely managing your system through a network interface
67