Smart Technologies SMART Board 800i5-SMP - Manual (Page 21)

Securing your interactive whiteboard system
This section explains how to secure the different components of your interactive whiteboard system.
Locking the pen tray to your interactive whiteboard
To learn how to lock the pen tray to your interactive whiteboard, see the SMART Board 800 series
interactive whiteboard user’s guide ( smarttech.com/kb/144817 ).
Securing the projector to the boom
To learn how to secure the SMART UF75 or SMART UF75w projector to the boom, see the included
SMART Board 880i5 and 885i5 interactive whiteboard system installation guide
( smarttech.com/kb/154546 ) or SMART Board 880i5-SMP or 885i5-SMP interactive whiteboard
system installation guide ( smarttech.com/kb/170130 ).
Routing the cables
When connecting cables from your SMART UF75 projector to your interactive whiteboard system,
make sure that all cables pass along the top of the interactive whiteboard wall-mounting bracket and
then down the side of the interactive whiteboard.
When connecting cables from a SMART UF75w projector to the interactive whiteboard, make sure
that all cables pass between the two interactive whiteboard wall-mounting brackets. Space your wall-
mounting brackets 4" (10.2 cm) apart to provide full support for the weight of your interactive
whiteboard.
Cable routing for SMART Board 880
interactive whiteboards
Cable routing for SMART Board 885
interactive whiteboards
C H A P T E R 2
Installing your interactive whiteboard system
9