Suzuki XL7 - Manual (Page 251)

6-9
MAINTENANCE SCHEDULE
78J00-03E
Service Instruction Maintenance
Inspect engine air cleaner fil-
ter. If necessary, replace filter.
• Refer to “Engine Air Cleaner/Filter” in “Checking Things Under the Hood” in the
“Service and Appearance Care” section.
• If you drive regularly under dusty conditions, inspect the filter at each engine oil
change.
•
Inspect suspension and steer-
ing components.
• Visually inspect front and rear suspension and steering system for damaged, loose,
or missing parts, signs of wear.
• Inspect power steering cables for proper hook-up, binding, cracks, chafing, etc.
(if equipped).
•
Inspect engine cooling sys-
tem.
• Visually inspect hoses and have them replaced if they are cracked, swollen, or
deteriorated.
• Inspect all pipes, fittings and clamps; replace parts as needed.
• To help ensure proper operation, a pressure test of the cooling system and pres-
sure cap and cleaning the outside of the radiator and air conditioning condenser is
recommended at least once a year.
•
Inspect wiper blades.
• Visually inspect wiper blades for wear or cracking.
• Replace wiper blades that appear worn or damaged or that streak or miss areas of
the windshield.
•
Inspect restraint system com-
ponents.
• Make sure the safety belt reminder light and all your belts, buckles, latch plates,
retractors, and anchorages are working properly.
• Look for any other loose or damaged safety belt system parts.
• If you see anything that might keep a safety belt system from doing its job, have it
repaired.
• Have any torn or frayed safety belts replaced.
• Also look for any opened or broken airbag coverings, and have them repaired or
replaced.
• The airbag system does not need regular maintenance.
•