Suzuki XL7 User Manual

Page 128

3-46

INSTRUMENT PANEL

78J00-03E

Setting the Tone
(Bass/Midrange/Treble)

BASS/MID/TREB
(Bass, Midrange, or Treble):
To adjust bass, midrange, or treble, press
the tune knob until the tone control labels
appear on the display. Continue pressing
to highlight the desired label, or press the
pushbutton positioned under the desired
label. Turn the tune knob clockwise or
counterclockwise to adjust the highlighted
setting. You can also adjust the highlighted
setting by pressing either the SEEK, FWD
(forward), or REV (reverse) button until the
desired levels are obtained. If a station’s
frequency is weak, or if there is static,
decrease the treble.

To quickly adjust bass, midrange, or treble
to the middle position, press the pushbut-
ton positioned under the BASS, MID, or
TREB label for more than two seconds. A
beep sounds and the level adjusts to the
middle position.

To quickly adjust all tone and speaker con-
trols to the middle position, press the tune
knob for more than two seconds until a
beep sounds.

EQ (Equalization):
Press this button to select preset equaliza-
tion settings.

To return to the manual mode, press the
EQ button until Manual displays or start to

manually adjust the bass, midrange, or tre-
ble by pressing the tune knob.

Adjusting the Speakers (Balance/Fade)

BAL/FADE (Balance/Fade):
To adjust balance or fade, press the tune
knob until the speaker control labels
appear on the display. Continue pressing
to highlight the desired label, or press the
pushbutton positioned under the desired
label. Turn the tune knob clockwise or
counterclockwise to adjust the highlighted
setting. You can also adjust the highlighted
setting by pressing either the SEEK, FWD,
or REV button until the desired levels are
obtained.

To quickly adjust balance or fade to the
middle position, press the pushbutton posi-
tioned under the BAL or FADE label for
more than two seconds. You will hear a
beep and the level will be adjusted to the
middle position.

To quickly adjust all speaker and tone con-
trols to the middle position, press the tune
knob for more than two seconds until a
beep sounds.

Finding a Category (CAT) Station

CAT (Category):
The CAT button is used to find XM

sta-

tions when the radio is in the XM

mode.

To find XM

channels within a desired

category, perform the following:

1) Press the BAND button until the XM

frequency is displayed. Press the CAT
button to display the category labels on
the radio display. Continue pressing the
CAT button until the desired category
name is displayed.

2) Press either of the two buttons below

the desired category label to immedi-
ately tune to the first XM

station

associated with that category.

3) Turn the tune knob, press the buttons

below the right or left arrows displayed,
or press the right or left SEEK buttons
to go to the next or previous XM

sta-

tion within the selected category.

4) To exit the category search mode,

press the FAV button or BAND button to
display your favorites again.

Undesired XM

categories can be

removed through the setup menu. To
remove an undesired category, perform the
following:

1) Press the MENU button to display the

radio setup menu.

2) Press the pushbutton located below the

XM CAT label.

3) Turn the tune knob to display the cate-

gory you want removed.

4) Press the pushbutton located under the

Remove label until the category name
along with the word Removed displays.

5) Repeat the steps to remove more cate-

gories.