Sharp UX-D50 - Manual (Page 113)

Caller ID (Requires Subscription to Service)
111
7. Spec
ial
F
unc
tions
To delete calls from the Caller ID list
If you want to delete a single call from the caller list, press while the call
appears in the display. If you want to delete all calls from the list, hold
down for at least 3 seconds while you are viewing any number in the list.
Viewing the Caller ID list from the cordless handset
You can also view the Caller ID list in the cordless handset display, and
automatically dial a number from the list. See page 45.
Priority Call
With Caller ID turned on, you can set your fax machine to make a special
ringing sound when you receive a call from a designated phone number. This
lets you know immediately who is calling without having to look at the display.
♦
This function is only for the fax machine. The cordless handset will not
make a special ringing sound.
To use this function, enter the desired phone number by following the steps
below (only one phone number can be entered).
1
Press once and 3 times.
2
Press once and once.
3
Press once.
4
Press to store a number.
(To clear a previously stored number, press and go to Step 6.)
5
Enter the number by pressing the number keys (max. 20 digits).
FUNKTION
1
2
Display: ENTRY MODE
PRIORITY #
1=SET, 2=CLEAR
all.book Page 111 Monday, September 1, 2003 3:46 PM