Sharp UX-D50 - Manual (Page 105)

Optional Reception Settings
103
5. Rec
e
iv
ing
Fa
x
e
s
Putting a call on hold
To put the other party on hold during a phone conversation, press .
When this is done, they cannot hear you. You can put the handset back in the
cradle without breaking the connection. When you are ready to speak with the
other party again, pick up the handset. If you did not put the handset back in
the cradle, press again to resume conversation.
Optional Reception Settings
Fax Signal Receive
Your fax will automatically begin reception if you hear a soft fax tone after
answering a call on your fax or an extension phone. If you use a computer fax
modem to send documents on the same line, you must turn this function off in
order to prevent your fax from mistakenly attempting to receive documents
WIEDERG./
HALTEN
WIEDERG./
HALTEN
1
Press once and twice.
2
Press once and 5 times.
3
Press once.
4
Press to turn on the function, or
to turn it off.
5
Press to return to the date and time display.
FUNKTION
1
2
STOP
Display:
OPTION SETTING
FAX SIGNAL RX
1=YES, 2=NO
The display briefly shows
your selection, then:
CALLER-ID
all.book Page 103 Monday, September 1, 2003 3:46 PM