Smooth Fitness V390 - Manual (Page 7)

www.smoothfitness.com 7
SUPPLIED COMPONENTS / SUPPLIED HARDWARE
This list identifies the major components you will use to assemble this product.
NOTICE: The length of all bolts and screws except those with flat heads is
Measured from below the head to the end of the bolt or screw. Flat head
bolts and screws are measured from the top of the head to the end of
the
bolt or screw
After unpacking the unit, you will notice that the package includes 3 bags of hardware (HARDWARE KIT A,
HARDWARE KIT B and HARDWARE KIT C).
Assembly’s Step 1: Using HARDWARE KIT A
Assembly’s Step 2, 4: Using HARDWARE KIT B
Assembly’s Step 7 ~ 9: Using HARDWARE KIT C
Note:
a. Please review below to know the content of each hardware kit (A, B and C)
b. Some small parts may have been pre-attached for shipping. If a part is not in the hardware bag, check to see if it has
been pre-assembled
HARDWARE KIT
A Part No. and Description Q’TY
88 Lock Washer (M8) 4 pcs
90 Washer (8x16x2.0t) 4 pcs
115 Bolt, Socket Head (M8xp1.25x90mm) 4 pcs
HARDWARE KIT
B Part No. and Description Q’TY
88 Lock Washer (M8) 5 pcs
90 Washer (8x16x2.0t) 5 pcs
97 Screw, Pan Head (M5xp0.8x25mm) 4 pcs