Parental lock, Control levels, If you forget the password – Sharp DV-S1U User Manual
Page 27: When parental level is selected
– 27 –
EN
9F21
CONTROL LEVELS
¡All
Parental lock is cancelled.
¡Level 8
DVD software of any grade (adult/general/children)
can be played back.
¡Levels 7 to 2
Only DVD software intended for general use and
children can be played back.
¡Level 1
Only DVD software intended for children can be
played back, with those intended for adult and
general use prohibited.
Notes
¡
With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
¡
Record the password in case you forget it.
IF YOU FORGET THE PASSWORD
1) Press the 4, 7, 3, 7 at step 3.
¡
Password will be cleared and parental level will be
set ALL.
2) Proceed the above steps 3-5 again.
1
Press the SETUP button in STOP mode.
¡
The setup screen will appear.
2
Press the
K
/
L
buttons to select Parental,
and then press the ENTER button.
3
Press the numeric buttons to enter the 4-
digit password, and then press the ENTER
button.
¡
When doing this for the first time, enter any 4 digits.
(except for 4737) That number will be used as the
password from the second time onward.
¡
By entering the password, you can change the con-
trol level and password settings.
¡
When CHANGE is selected, press the numeric but-
tons to enter the 4 digit password. Then press the
ENTER button.
4
Press the
K
/
L
buttons to select an item, and
then press the ENTER button.
When Parental Level is selected
¡
Press the o/p buttons to select an item from All or
8 to 1, and then press the ENTER button.
PARENTAL LOCK
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
SET-UP
Please enter a 4-digit password.
- - - -
SET-UP
PARENTAL CONTROLS
PASSWORD
1.PARENTAL LEVEL
ALL
2.CHANGE
SET-UP
PARENTAL CONTROLS
ALL
8
7 [NC-17]
6 [R]
5
SET-UP
PARENTAL CONTROLS
PARENTAL LEVEL
5
Press the SETUP button.
¡
The setup mode will be canceled and the ordinary
screen will appear.