Sharp DV-S1U - Manual (Page 26)

– 26 – EN
9F21
1 Press the SETUP button in STOP mode.
¡ The setup screen will appear.
2 Press the K / L buttons to select Audio and
then press the ENTER button.
3 Press the K / L buttons to select an item, and
then press the ENTER button.
4 Press the SETUP button.
¡ The setup mode will be canceled and the ordinary
screen will appear.
AUDIO SETTINGS
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
SET-UP
DRC (Default : OFF)
On : DRC
(Dynamic Range Control)
¡ This function is for controlling the range of sound
volume. By compressing the range of sound vol-
ume, it is possible not only to suppress the output
of loud sound at night and but also to raise the vol-
ume of low sound.
¡ However, this function is effective only for the
sound recorded by Dolby Digital recording. When
the sound recorded by Dolby Digital 5.1ch is out-
putted, the sound is compressed automatically
even with this function being set at “Off ”.
DOLBY DIGITAL (default : BITSTREAM)
BITSTREAM : Output by Dolby Digital
Set to BITSTREAM when the unit is connected to
Dolby Digital Decoder.
1.DRC OFF
2.DOLBY DIGITAL BITSTREAM
3.DTS OFF
4.DOWNSAMPLING AUTO
SET-UP
AUDIO CONTROLS
1.DRC OFF
2.DOLBY DIGITAL BITSTREAM
3.DTS OFF
4.DOWNSAMPLING AUTO
SET-UP
AUDIO CONTROLS
DTS (Default : OFF)
On: Output by DTS
Set to On when the unit is connected to DTS
Decoder
DOWNSAMPLING (Default : AUTO)
Set the output for the DVD recorded in PCM 96kHz
(96kHz or 48 khz)
¡ Press the o/p buttons to select an item, and then
press the ENTER button.
1.DRC OFF
2.DOLBY DIGITAL BITSTREAM
3.DTS OFF
4.DOWNSAMPLING AUTO
SET-UP
AUDIO CONTROLS
SET-UP
AUDIO CONTROLS
DOWNSAMPLING
1.AUTO
2.48kHz
3.96kHz
1.DRC OFF
2.DOLBY DIGITAL BITSTREAM
3.DTS OFF
4.DOWNSAMPLING AUTO
SET-UP
AUDIO CONTROLS