Sharp DV-S1U - Manual (Page 16)

– 16 – EN
9F21
RANDOM (Audio CD)
1 Press the MODE button in stop mode.
¡ The program setting menu screen will appear.
2 Press the MODE button again.
CD
RANDOM
EXIT : MODE START : PLAY
REPEAT
You can use this function during playback.
1 Press the REPEAT button.
For DVDs
¡ A single title or chapter is played back repeatedly.
¡ Pressing the REPEAT button cycles the display on
the screen as follows.
For audio CDs
¡ The whole disc or a single track is played back
repeatedly.
¡ Pressing the REPEAT button cycles the display on
the screen through Off, TRACK and All.
CD DVD
The current Title is
played back repeatedly.
The current Chapter is
played back repeatedly.
No repeat playback. [OFF]
[CHAPTER]
[TITLE]
The whole Disc is
played back repeatedly.
The current Track is
played back repeatedly.
No repeat playback. [OFF]
[TRACK]
[ALL]
If the REPEAT button is pressed once dur-
ing program/random playback, the current
track is played back repeatedly.
If the REPEAT button is pressed again, the
program/random playback is performed
repeatedly.
Notes
¡ Repeat playback is not available with some discs.
¡ The REPEAT setting will be cleared when moving
to other title, chapter or track.
¡ Repeat playback is not function during A-B repeat
playback.
Notes
¡ In the case of DVD, Time Search in Title is effec-
tive. (But Time Search in Chapter is ineffective.)
¡ In the case of CD, Time Search in Track is effective.
(But Time Search in the entire disc is ineffective.)
¡ Playback from a desired time count is not available
with some discs or if the unit is in stop mode.
MARKER
You can define the part to be called back.
1 Press the MARKER button during playback.
Set the marker
¡ Using the cursor (s/ B) button, position the cursor
on to the marker number shown as “NOT SET”.
Press the ENTER button when the screen to be
reviewed appears. The marked time will be dis-
played. Up to 5 points can be
marked.
Call back the marker
¡ Using the cursor (s/ B) button, position the cursor
on to the marker number to be called back and press
the ENTER button.
Clear the marker
¡ Using the cursor (s/ B) button, position the cursor
on to the marker number to be cleared and press the
CLEAR button.
To clear all markers, place the cursor on “AC” (All
clear markers) and press the ENTER button.
2 Press the MARKER button or the RETURN
button to exit the display.
CD DVD
1 2 3 4 5 AC
NOT SET
3 Press the PLAY button. Random playback
will then start.
Note
¡ Program playback is not available during random
playback.