Sharp DV-S1U - Manual (Page 25)

– 25 – EN
9F21
4 Press the K / L buttons to select a desired
item, and then press the ENTER button.
5 Press the SETUP button.
¡ The setup mode will be canceled and the ordinary
screen will appear.
Note
¡ Be sure to press the SETUP button, or the setting
will not work.
¡ You can also choose the item by pressing the num-
bers.
¡ You can change the PANEL DISPLAY setting
(BRIGHT or DIMMER) by pressing the DIMMER
button on the remote control.
1 Press the SETUP button in STOP mode.
¡ The setup screen will appear.
2 Press the K / L buttons to select DISPLAY
and then press the ENTER button.
3 Press the K / L buttons to select an item, and
then press the ENTER button.
DISPLAY SETTINGS
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
SET-UP
ANGLE ICON (Default: On)
Display or not display the Angle icon on the screen.
AUTO POWER OFF (Default: On)
Set or not set to turn off after the screen saver is started and
no keys are pressed for 35 minutes.
TV ASPECT
(Default : 4:3 LETTER BOX)
4:3 LETTER BOX : Wide screen with black bars on top
and bottom
4:3 PAN & SCAN : Full height picture, trimmed both
sides
16:9 WIDE : If wide screen TV is connected
PANEL DISPLAY (Default : BRIGHT)
Adjust the brightness of the display of the unit.
* Auto: Stays dim only during playback.
1.TV ASPECT 4:3 LETTER BOX
2.PANEL DISPLAY BRIGHT
3.ANGLE ICON ON
4.AUTO POWER OFF ON
SET-UP
DISPLAY CONTROLS
1.TV ASPECT 4:3 LETTER BOX
2.PANEL DISPLAY BRIGHT
3.ANGLE ICON ON
4.AUTO POWER OFF ON
SET-UP
DISPLAY CONTROLS
1.BRIGHT
2.DIMMER
3.AUTO
SET-UP
DISPLAY CONTROLS
PANEL DISPLAY
SET-UP
DISPLAY CONTROLS
1.TV ASPECT 4:3 LETTER BOX
2.PANEL DISPLAY BRIGHT
3.ANGLE ICON ON
4.AUTO POWER OFF ON
SET-UP
DISPLAY CONTROLS
1.TV ASPECT 4:3 LETTER BOX
2.PANEL DISPLAY BRIGHT
3.ANGLE ICON ON
4.AUTO POWER OFF ON