SIGMA SD10 - Manual (Page 83)

83
LOCKING IMAGES
TO LOCK A SINGLE IMAGE
1
Use the ＜ ／ ／ ／ ＞ arrows on the
4-way controller to select the image to be locked
in Contact Sheet or Single-Image View.
2
Press ＜ MOD ＞ to display the Modification
Menu.
3
Use the ＜ ／ ＞ arrows on the 4-way controller
to select the Lock Menu.
4
Use the
＜ ／ ＞
arrows on the 4-way
controller to select “Lock”.
• If the selected image is already locked, the
“Lock” menu item will change to “Unlock”.
5
Press OK
＜
OK＞ to lock the image. A key
icon will appear in the upper-right corner of
the image indicating that the image is locked.
TIP
•
To unlock a locked image, select the locked image and follow the same steps as
above.
•
If the Lock Menu was opened from Jump Mode, the “Lock” menu item will not be
available.