SIGMA SD10 - Manual (Page 69)

69
MAGNIFYING IMAGES
(ZOOMED-IN VIEW)
To view image detail or check focus, recorded images can be magnified up to 5
levels, depending on the resolution of the image.
TO MAGNIFY IMAGE
Press
＜ ＞ on the ＋ / － Controller from
Single-Image View.
While in Zoomed-in View:
Press
＜ ＞
on the ＋ / － Controller to increase magnification. Maximum
magnification is 400%.
Press
＜ ＞
on the ＋/－Controller to decrease magnification.
Press the ＜ ／ ／ ／ ＞ arrows on the 4-way controller to pan around the
image.
Press
＜
CANCEL
＞
to return to Single-Image View.
TIP
•
While in Zoomed-In View, the 4-way controller cannot be used to change
images. Press ＜ CANCEL＞ to get out of Zoomed-In View, or return to
Single-Image View by pressing
＜ ＞
on the ＋/－Controller, then use the
4-way controller to change the image selection.