SIGMA SD10 - Manual (Page 57)

57
AUTO BRACKETING
■ For the first frame, “ ” mark will be displayed continuously on the LCD panel.
For the second frame, “ ” mark on the LCD panel, will blink slowly, then it will
blink quickly for the third frame.
■ When you set the self-timer mode, the camera will automatically take three
consecutive pictures.
■ It is possible to change the drive mode during the Auto Bracketing operation. But
if you set the self-timer mode, the camera will take three continuous pictures.
■ It is not possible to use Auto Bracketing mode for flash photography. Auto
Bracketing will not affect the output level of the flash.
Auto Bracketing mode can be used in combination with Exposure
Compensation.
You can take pictures with Auto Bracketing mode based on a compensated exposure
which you set.
To do so, please set both the Auto Bracketing mode and Exposure Compensation
mode as desired.
The combined value (Exposure Compensation and Auto Bracketing) will be indicated
on the viewfinder display.
Example
Exposure Compensation +1.7 with Auto Bracketing amount 1.0
First Frame 1.7
(Exposure compensation +1.7 & no shift value)
Second Frame 0.7
(Exposure compensation +1.7 & shift value -1.0)
Third Frame 2.7
(Exposure compensation +1.7 & shift value +1.0)