Warning indicators and messages – Samsung HMX-R10SN User Manual
Page 143
139
USB
Message
Icon
Informs that...
Action
Fail Printer Connecting
Change 'USB Connect'
-
A problem occurred when
connecting the camcorder
via USB to a printer.
• Check the USB cable.
• Try the connection procedure again.
• Switch “USB connect” function to
“PictBridge.”
Fail USB Connecting
Change 'USB Connect'
-
A problem occurred when
connecting the camcorder
via USB to a PC.
• Check the USB cable.
• Try the connection procedure again.
• Switch “USB connect” function to
“Mass Storage.”
Ink Error
-
There is a problem with the
ink cartridge.
• Check the ink cartridge.
• Put a new ink cartridge in the
printer.
Paper Error
-
There is a problem with the
paper.
• Check the paper in the printer. If
there is no paper, insert the paper.
File Error
-
There is a problem with the
file.
• Your camcorder does not support
this file format.
• Try another file recorded on your
camcorder.
Printer Error
-
There is a problem with the
printer.
• Turn the printer’s power off and on.
• Contact the printer manufacturer’s
service center.
Print Error
-
A problem occurred during
printing.
• Do not remove power source or
eject memory card during printing.
When there is dew condensation, put the camcorder aside for a while before using
• What is dew condensation?
Dew condensation happens when a camcorder is moved to a place where there is a
significant temperature difference from the previous place. The Dew condenses on the
external or internal parts of the camcorder, and on the reflection lens. When this happens, it
may cause a malfunction or damage to the camcorder when using the device with the power
on while there is dew condensation.
• What can I do?
Turn the power off and detach the battery pack, and leave it in a dry area for 1~2 hours
before using it.
• When does the dew condensation occur?
When the device is relocated to a place with a higher temperature than the previous location,
or when using it in a hot area suddenly, it will cause condensation.
- When recording outside in cold weather during the winter and then using it in indoors.
- When recording outside in hot weather after being indoors or inside a car where the A/C
was running.
WARNING INDICATORS AND MESSAGES