Samsung DVD-R2000 - Manual (Page 58)

58
1 Turn on the TV
2 Point the DVD’s remote control at the
TV.
3 While holding the TV POWER button
down, enter the code for your
brand.
e.g) For Samsung TV
While holding down the TV POWER button,
enter 0 and 1.
4 If the TV turns off, setup is complete.
Enter other codes of the same
brand if the first code does not
work.
5 To operate the TV, use the “Remote
Control” described on page 16.
NOTE
The remote control may not be able to control every model
TV of the brands listed.
Controlling TV with the Remote Control
The remote control can also be set up to control most TVs. To program the remote control, use
the code that corresponds to your brand.
Reference