Samsung DVD-R2000 - Manual (Page 26)

26
Basic Functions
Repeat Play & Using the A-B Repeat Function
Repeat Play
Repeat play allows you to repeat a track, title or the entire disc.
1 Press the REPEAT button on the remote.
- Repeat screen appears.
2 Select Title or Chapter using the LEFT/RIGHT button
(when playing a DVD/DVD-RAM). Press the ENTER button.
Select All or Track using the LEFT/RIGHT button
(when playing a VCD/CD/MP3)
3 To return to normal playback, press REPEAT again. Then, press
the LEFT/RIGHT button to select Off and press ENTER.
4 To make the screen disappear, press the REPEAT button again.
Using the A-B Repeat Function (Except DVD-RAM, MP3)
The A-B Repeat function lets you mark a segment to repeat between the beginning (A) and the
end (B) of the segment you want to review.
1 Press the REPEAT(A-B) button on the remote.
- Repeat (A-B) screen appears.
2 Use the LEFT/RIGHT button to select A. Then, press the ENTER
button at the point where you want the repeat play to start (A).
- The B is automatically highlighted.
3 Press the ENTER button at the point where you want the repeat
play to Stop (B).
- The repeat (A-B) that you set plays until you turn repeat (A-B) off.
4 To return to normal playback, press REPEAT(A-B) again. Then,
press the LEFT/RIGHT button to select Off and press ENTER.
5 To make the screen disappear, press the REPEAT(A-B) button
again.
NOTE
• DVD repeats playback by title or, chapter. CD, VCD and MP3 repeat playback by all or track.
• Depending on the disc, the Repeat function may not work.
• If the title or track is completed before marking the end (B), the end of title or track becomes B
automatically.
• When in VCD 2.0 mode (MENU (PBC) ON mode), this function does not work.