SRS Labs CP-X505/CP-X605 - Manual (Page 7)

7
Setting up
Setting up
Install the projector according to the environment and manner the projector will be
used in.
WARNING ŹPlace the projector in a stable horizontal position. If the
projector falls or is knocked over it could cause injury and/or damage to the
SURMHFWRU8VLQJDGDPDJHGSURMHFWRUFRXOGWKHQUHVXOWLQ¿UHDQGRUHOHFWULF
shock.
• Do not place the projector on an unstable, slanted or vibrational surface such
as a wobbly or inclined stand.
• Do not place the projector on its side, front or rear position.
• Consult with your dealer before a special installation such as suspending from
a ceiling.
Ź3ODFHWKHSURMHFWRULQDFRROSODFHDQGHQVXUHWKDWWKHUHLVVXI¿FLHQW
YHQWLODWLRQ7KHKLJKWHPSHUDWXUHRIWKHSURMHFWRUFRXOGFDXVH¿UHEXUQVDQGRU
malfunction of the projector.
• Do not stop-up, block or otherwise cover the projector's vents.
• Keep a space of 30 cm or more between the sides of the projector and other
objects such as walls.
• Do not place the projector on metallic thing or anything weak in heat.
• Do not place the projector on carpet, cushions or bedding.
• Do not place the projector in direct sunlight or near hot objects such as
heaters.
• Do not place anything near the projector lens or vents, or on top of the
projector.
• Do not place anything that may be sucked into or stick to the vents on the
bottom of the projector. This projector has some intake vents also on the
bottom.
Ź'RQRWSODFHWKHSURMHFWRUDQ\SODFHZKHUHLWPD\JHWZHW*HWWLQJWKH
SURMHFWRUZHWRULQVHUWLQJOLTXLGLQWRWKHSURMHFWRUFRXOGFDXVH¿UHHOHFWULFVKRFN
and/or malfunction of the projector.
• Do not place the projector in a bathroom or the outdoors.
• Do not place anything containing liquid near the projector.
CAUTION Ź$YRLGSODFLQJWKHSURMHFWRULQVPRN\KXPLGRUGXVW\SODFH
3ODFLQJWKHSURMHFWRULQVXFKSODFHVFRXOGFDXVH¿UHHOHFWULFVKRFNDQGRU
malfunction of the projector.
• Do not SODFHWKHSURMHFWRUQHDUKXPLGL¿HUVVPRNLQJVSDFHVRUDNLWFKHQ
Ź3RVLWLRQWKHSURMHFWRUWRSUHYHQWOLJKWIURPGLUHFWO\KLWWLQJWKHSURMHFWRUV
remote sensor.