SRS Labs CP-X505/CP-X605 User Manual
Page 64
64
Troubleshooting
Regarding the indicator lamps (continued)
POWER
indicator
LAMP
indicator
TEMP
indicator
Description
Blinking
In
Red
or
Lighting
In
Red
Turned
off
Blinking
In
Red
The cooling fan is not operating.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
VXI¿FLHQWO\FRROHGGRZQSOHDVHPDNHFRQ¿UPDWLRQ
that no foreign matter has become caught in the fan,
etc., and then turn the power on again.
If the same indication is displayed after the remedy,
please contact your dealer or service company.
Blinking
In
Red
or
Lighting
In
Red
Turned
off
Lighting
In
Red
There is a possibility that the interior portion
has become heated.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
VXI¿FLHQWO\FRROHGGRZQSOHDVHPDNHFRQ¿UPDWLRQRI
the following items, and then turn the power on again.
• Is there blockage of the air passage aperture?
,VWKHDLU¿OWHUGLUW\"
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy,
please set FAN SPEED of the SERVICE item in the
OPTION menu to HIGH.
Lighting
In
Green
Simultaneous
blinking in
Red
,WLVWLPHWRFOHDQWKHDLU¿OWHU
Please immediately turn the power off, and clean or
FKDQJHWKHDLU¿OWHUUHIHUULQJWRWKHVHFWLRQ³$LU)LOWHU´
$IWHUFOHDQLQJRUFKDQJLQJWKHDLU¿OWHUSOHDVHEHVXUH
WRUHVHWWKH¿OWHUWLPHU$IWHUWKHUHPHG\UHVHWWKH
power to ON.
Lighting
In
Green
Alternative
blinking in
Red
There is a possibility that the interior portion
has become overcooled.
Please use the unit within the usage temperature
parameters (5°C to 35°C). After the treatment, reset
the power to ON.
Blinking in
Green
for
approx. 3
seconds
Turned
off
Turned
off
$WOHDVW³3RZHU21´VFKHGXOHLVVDYHGWRWKH
projector.
(Please refer to the User’s Manual-Network Functions:
Schedule Settings for more information.)
NOTE • When the interior portion has become overheated, for safety
purposes, the power source is automatically turned off, and the indicator lamps
may also be turned off. In such a case, press the “
{” (OFF) side of the power
VZLWFKDQGZDLWDWOHDVWPLQXWHV$IWHUWKHSURMHFWRUKDVVXI¿FLHQWO\FRROHG
GRZQSOHDVHPDNHFRQ¿UPDWLRQRIWKHDWWDFKPHQWVWDWHRIWKHODPSDQGODPS
cover, and then turn the power on again.