Socket Mobile Series 7 - Manual (Page 40)

Microsoft Windows XP Service Pack 2:
Refer to the documentation for your Bluetooth hardware/software for
instructions on discovering and connecting to the CHS.
1. Turn on the Cordless Hand Scanner. Press the small power button for five
seconds, until you see the LED turn blue. The LED should blink blue once
per second to show that the Bluetooth radio is on but not connected.
2. Turn on the Bluetooth radio of your computer.
3. Use the Add Bluetooth Device Wizard to discover and connect to the
Cordless Hand Scanner. Click on the Bluetooth icon in the task tray. In
the pop-up menu, click Add a Bluetooth Device.
4. During the device discovery, the Cordless Hand Scanner will appear as
Socket CHS [xxxxxx]
The characters in brackets are the last 6 characters of the
scanner’s Bluetooth MAC address.
5. In the passkey options screen, select the option Let me choose my own
passkey and enter a passkey of your choice.
6. To indicate the connection, the CHS will beep once.
7. In the last screen of the Add Bluetooth Device Wizard, note the COM
number of the Outgoing COM port.
40