Socket Mobile Series 7 - Manual (Page 24)

4 | Setup for Palm
This chapter explains how to install and use the
Cordless Hand Scanner (CHS) with a Bluetooth
enabled device running Palm OS 5.2 or later.
Before you begin the instructions in this chapter,
make sure you have installed the batteries (and
tether, if desired), and charged the scanner, as
described in Chapter 2, “Hardware Setup.”
Setup Summary
STEP 1: Install the software.
STEP 2: Connect scanner to PDA with Bluetooth.
STEP 3: Scan data into your application.
OPTIONAL:
• Configure scan settings.
• Select symbologies.
• Test bar codes.
For help using SocketScan, tap on the button on the top of
any screen.
24