Tap on the cs hw tab, Enter the following settings – Socket Mobile Series 7 User Manual
Page 16
6. Tap on the CS HW tab.
Enter the following settings:
• Trigger: Select whether you would like the CHS to scan only when a
Bluetooth connection to the device is detected. If you require the
CHS to detect a Bluetooth connection before each scan, scanning
will be a few milliseconds slower.
• Good Read Indicator: Select how you would like the CHS to indicate
that it has successfully read data.
• Battery Level: No progress bar should appear since you are not
connected to the CHS.
• Disable Auto Power Off mode: The CHS automatically shuts off if
there is no Bluetooth connection for 20 minutes. Check to disable.
7. After entering settings, tap ok to save the changes.
16