Socket Mobile Series 7 - Manual (Page 12)

3 | Setup for Windows Mobile
This chapter explains how to install and use the
Cordless Hand Scanner (CHS) with a Bluetooth
enabled Pocket PC or other mobile computing device
running Windows Mobile 2003, 2003SE or 5.0.
Before you begin the instructions in this chapter,
make sure you have installed the batteries (and tether,
if desired), and charged the scanner, as described in
Chapter 2, “Hardware Preparation.”
Setup Summary
STEP 1: Install the software.
STEP 2: Configure scanner settings.
STEP 3: Connect scanner to host device with Bluetooth.
STEP 4: Scan data into your application.
OPTIONAL:
• Select symbologies.
• Configure prefix/suffixes.
• Run Scan Demo.
12