Sharp AR-287 - Manual (Page 82)

4-2
CHAPTER
4
PAPER
Types and sizes of copy paper
Size Weight Capacity Special paper
(20 lb. bond paper)
Paper trays 5-1/2" x 8-1/2" 15 lbs. to 28 lbs. 500 sheets
1 and 2 to 11" x 17"
Bypass tray 5-1/2" x 8-1/2" 14 lbs. to 34 lbs.* 50 sheets Transparency film, labels,
to 11" x 17" (Ordinary paper) tracing paper, 65 lb. paper** ,
110 lb. paper**
● For best results, use only paper recommended by SHARP.
* For paper weighing from 28 to 34 lbs., 8-1/2" x 11" is the maximum size
that can be fed through the bypass tray.
** Paper heavier than 34 lbs. must be fed narrow side into the feed slot of
the bypass tray.
Loading copy paper
“
OPEN TRAY AND ADD PAPER.
” will be displayed when there is
no copy paper in a selected paper feed station.
When a selected paper tray is not installed or is improperly installed,
“
PUSH PAPER TRAY INTO THE MACHINE UNTIL IT
LATCHES.
” will be displayed. Install it or push it back firmly into
place.
For best results, use only Sharp recommended paper.
SUPPLIES
Paper