Text stamp – Sharp AR-287 User Manual
Page 68
3-34
CHAPTER
3
8
Select the print direction.
●
If the PAMPHLET COPY function is used with this function, the
portrait orientation (
) must be selected.
9
Press the upper “OK” key.
10
Make all other desired copier selections and enter the
desired number of copies.
11
Press the START key.
●
If the document feeder is used, scanning of originals and copying
will start.
●
If the document glass is used, proceed to the next step.
12
Replace the finished original with the next original after
the START key indicator lights up, and then press the
START key. Repeat this step until all originals have been
scanned. Then, press the “READ-END” key on the touch
panel.
●
Copying will start at this time.
●
Up to 120 sheets of 8-1/2" x 11" originals or up to 60 sheets of
originals larger than 8-1/2" x 11" can be scanned.
●
To cancel the DATE function, select the DATE function again
and press the “CANCEL” key.
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
SPECIAL FUNCTIONS
Text stamp
TEXT STAMP
DATE
SELECT
STAMP
DIRECTION
PAGE
NUMBER
WATERMARK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO 8/ 11
1
2
STAMP
DATE
SELECT
STAMP
DIRECTION
PAGE
NUMBER
WATERMARK
OK
OK