Sharp AR-287 - Manual (Page 29)

2-15
CHAPTER
2
Two-sided copying with bypass tray
Two-sided copies can be made manually using the bypass tray,
when the heavy paper which is out of spec. for duplex module is
used.
1 Place the first original face down on the document glass
and make a copy.
● The first side of the copy can be made using any of the paper feed
stations.
2 Replace the first original with the second original and
close the document cover.
● Make sure the first and second originals are oriented in the same
way on the document glass.
● The first and second originals can be set in the document feeder
tray. However, they must be set individually.
3 Turn the first copy over without changing its top-bottom
orientation and place it into the bypass tray.
● Be sure to feed the copies one sheet at a time.
4 Press the “PAPER SELECT” key and select the bypass
tray.
5 Press the START key.
SPECIAL PAPERS (manual feed)
MAKING COPIES
Special papers (manual feed)
1 2
1 2
3 4
3 4
1 2
CA
CLEAR ALL
START
R SELECT
100%
COPY RATIO
O 8/ 11 1
2
/ 11
1 17
8/ 11R 1
2
1
2