Sanyo GH68-24473A - Manual (Page 126)

125
Receive data via the Bluetooth wireless feature
1 Enter the PIN for the Bluetooth wireless feature (if
necessary).
2 When a pop-up window appears, tap Hide.
• Tap Cancel to stop receiving the data.
3 When prompted to allow incoming data, tap Yes to save the
data to your device.
To receive all incoming beams,
1
Tap Start > Settings.
2 On the Basic Settings tab, tap Network Settings >
Bluetooth > Menu > Device Service.
3 Tap Options next to Object Push.
4 Check next to Enable to receive all Incoming beams.
5 Tap Done.
B7610.book Page 125 Saturday, August 1, 2009 11:14 AM