Sony LBT-XG500 - Manual (Page 16)

16
Recording to a tape
–– CD Synchro Recording/High Speed Dubbing/Recording Manually/
Program Edit
You can record from a CD, tape or radio. You can use TYPE I (normal) or TYPE II (CrO
2
) tapes.
The recording level is adjusted automatically.
Recording from a tape
(High-Speed Dubbing)
Recording from a CD
(CD Synchro Recording)
Recording Manually
Insert a recordable tape into deck B.
Press FUNCTION
repeatedly until “TAPE”
appears. Press FUNCTION
repeatedly until “CD”
appears. Press FUNCTION or
TUNER/BAND
repeatedly until the
source or band you
want to record appears.
Insert the tape you want to
record into deck A. Insert the CD you want to
record. Insert the CD/tape, or
tune to the station you
want to record.
Press CD SYNC. Press z REC.
Press DIRECTION repeatedly to select g to record on one side.
Select j (or RELAY) to record on both sides.
Press X .
Recording starts.
Tips
• When you want to record on the reverse side, press
h after pressing z REC so that the indicator on
the h button (for the reverse side) lights up green.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• For recording from the tape:
If you set the direction to j when the tapes you
use have different lengths, the tapes in each deck
1
2
3
4
5
6
7
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• To record with the surround effect, press
SURROUND so that “SUR ” appears.
The equalizer settings will not be recorded.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Press H SPEED DUB.
Steps
DECK B stands by for recording.
To reduce the hiss noise in low level high frequency signals, press DOLBY NR so that
“DOLBY NR B” appears in the display (except when recording from a tape).
Start playing the
source to be recorded.
To stop recording
Press x.