Sony VRD-MC6 User Manual
Page 50
50
To pause recording
Press the
(record) button during
recording. To resume recording, press
the
(record) button again.
5
Press the
(stop) button to stop
recording.
6
To record an additional video,
repeat steps 4 and 5.
7
Press the Z (eject) button to eject
the disc when recording is
complete.
A message asking whether to finalize
the disc appears.
8
To finalize the disc, press
V or v
to select [Yes] and press the
ENTER button.
If you select [No], the disc will be
ejected without being finalized. You can
skip step 9.
z
Hints
• To finalize a disc means to make the disc
playable on other DVD devices. For details
about finalizing, refer to [Finalize disc] on page
68.
• When using a DVD+RW disc, finalizing is
unnecessary. You can skip steps 8 and 9.
9
Press
V or v to select [OK] and
press the ENTER button.
When finalizing has completed, the disc
tray opens.
b
Notes
• Start recording immediately after inserting a
disc. The recording process may take a few
seconds to start after pressing the
(record)
button if the disc was inserted more than 10
minutes prior to starting.
• When you press the
(stop) button, you may
hear the noise of the disc turning momentarily.