Sony Video Projector VPL-VW90ES User Manual
Page 25
25
C
o
n
nec
tio
n
s an
d Pr
epa
ra
tio
n
s
• Use a high-speed HDMI cable. With a standard HDMI cable, images of 1080P, DeepColor, and
3D video images may not be displayed properly.
• When connecting an HDMI cable to the projector, make sure the
V
mark on the upper part of the
HDMI input of the projector and the
v
mark on the connector of the cable is set at the same
position.
• If the picture from equipment connected to the projector with an HDMI cable is not clear, check
the settings of the connected equipment.
To connect to equipment with component video output
connectors
Notes
Component video cable (not supplied)
: Video signal flow
Equipment with component
video output connectors
Right side of the projector
AV amplifier
Speakers
This manual is related to the following products: