Sharp R-208S - Manual (Page 48)

INSTALLING THE SOFTWARE
46
5 Select "Start this program" and
then select "Sharp Button
Manager T" from the pull-down
menu.
6 Click the "Apply" button.
7 Repeat Steps 4 through 6 to link Button Manager to "SC2:"
through "SC6:".
Select "SC2:" from the "Select an event" pull-down menu. Select "Start this
program", select "Sharp Button Manager T" from the pull-down menu, and
then click the "Apply" button. Do the same for each ScanMenu through
"SC6:".
When the settings have been completed, click the "OK" button to close the
screen.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be changed with
the setting window of Button Manager.
For the factory default settings of the scan menu and the procedures for
configuring Button Manager settings, see "Button Manager Settings" in the
Online Manual.
!AR-208S_208D.book 46 ページ ２００７年１２月３日 月曜日 午後３時３３分