Sharp R-208S - Manual (Page 131)

23
INITIAL SETTINGS
2
To change the display format to 12-hour or 24-hour format, follow the steps below:
1 Press the [MENU] key.
2 Press the [ ] key ( ) or [ ] key ( )
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
3 Press the [ ] key ( ) or [ ] key ( )
until "23:DATE&TIME FORMAT"
appears, and then press the [ENTER]
key.
4 Press the [ ] key ( ) or [ ] key ( )
until "1:TIME FORMAT" appears, and
then press the [ENTER] key.
5 Press the [ ] key ( ) or [ ] key ( )
to select "1:12HOUR" or "2:24HOUR".
6 Press the [ENTER] key.
7 Press the [MENU] key.
Press the [MENU] key to
exit.
"4:USER PROGRAM"
Selection
"23:DATE&TIME FORMAT"
Selection
"1:TIME FORMAT"
Selection
!AR-FX13_sec.book 23 ページ ２００７年１１月２８日 水曜日 午後４時２２分