Sony DVS-9000-C User Manual
Page 25
1-17
DVS-9000/9000SF
1-8. Checks on Completion of Installation
DI3 (F-3), DI6 (F-3), DI7 (F-3), DI8 (F-4) (green) :
STATUS1 to STATUS4 LED
Used for maintenance purpose. Only the STATUS1 LED is
lit in normal operation.
DI4 (green) (B-5) :
+
+
+
+
+3.3 V
Indicates the status of the VCC (CORE) and VCC (I/O)
powers that are supplied to the CPU-DK module.
: COM CPU-2
SW1 (D-5) : RESET switch
Pressing this switch resets the CPU-DK module.
n
In some machines in which the CPU-DK module is
installed, the system reset may be activated.
SW2 (C-5) : MODE switch
8-pin DIP switch
Used only for production in the assembly factory. All
switches are set to OFF for normal operation.
Default setting when shipped from the factory is all OFF.
D1 (B-1) : SBUS RX status LED
S1 (B-3) : RESET switch
E1 (B-3) : GND terminal
respective check terminals.
TP1 (A-2) : RX check terminal
S-BUS communication line measuring terminal.
TP2 (A-3) : TEST terminal
Terminal for testing.