Sony DVS-9000-C - Manual (Page 13)

1-5
DVS-9000/9000SF
Installation Procedure
1.
Turn off the main power of the DVS-9000/9000SF and
disconnect the AC power cord from the wall outlet.
2. Loosen the four screws (with drop-safe) and remove
the front panel to the arrow.
3. Remove the screws (DVS-9000: 6 screws, DVS-9000SF:
4 screws) and remove the Extract PWB stopper assembly.
Screws (with drop-safe)
Front panel
Screws
(with drop-safe)
4. While the eject levers are opened as shown in the
illustration, insert the plug-in board into the board
guide rail.
Extract PWB stopper
assembly
B3 x 5
B3 x 5
Eject levers
1-4. Installing the Options
(The illustration shows the DVS-9000.)
(The illustration shows
the DVS-9000.)
(The illustration shows the DVS-9000.)