Sony UP-D897 - Manual (Page 18)

Ot
her
s
Specifications
18
3
Clean the platen roller gently with a damp clothe
soaked in water and a mild detergent.
Notes
• After the surface of the platen roller wiped has
been dried completely, turn the platen roller to
clean another portion.
• Do not turn the platen roller with hands. Use the
FEED button to turn it. To clean another part of
the surface of the platen roller, go to the next step.
4
Press and hold down the FEED button so that the
platen roller turns automatically. Release the FEED
button when the surface of the platen roller to be
cleaned appears.
Notes
• The platen roller is turning while you are pressing
the FEED button. Be careful so that you have
your fingers caught in the turning platen roller.
• Be sure to start cleaning only after the platen
roller has stopped completely.
5
Repeat steps 3 and 4 until the platen roller becomes
clean.
6
After the platen roller has been dried completely,
close the door by pushing it.
Specifications
Power requirement
100 to 240 V AC, 50/60 Hz
Input current 1.5 A to 0.8 A
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
20 % to 80 %
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20 % to 90 %
Dimensions 154
Ч 88 Ч 240 mm (w/h/d)
(6 1/6
Ч 3 1/2 Ч 9 1/2 inches)
Mass 2.6 kg (5 lb 11 oz) (printer only)
Thermal head Thin-film thermal head, 1280 dots
Gradation 256-level gradation (8-bit)
Memory capacity
4096
Ч 1280 Ч 8 (bit)
Picture size 320
× 100 mm (max.)
Printing speed About 2 sec./image (960
× 1280 dots)
(printing at the high speed)
About 3.3 sec./image (960
×
1280 dots) (printing at the normal
speed)
Picture elements
4096
× 1280 dots (max.)
Dot density H: 100 mm/1280 dots = 0.078
V: 100 mm/1280 dots = 0.078
Square dots
Interface Hi-Speed USB (USB 2.0)
Accessories provided
Thermal head cleaning sheet
(1)
CD-ROM (including multi-lingual
operating instructions, Readme and
printer driver)
(1)
Media label (1)
USB cable 1-824-211-41 (SONY)
(1)
Before Using this Printer
(1)
Service Contact List
(1)
Software License
(1)
Platen roller
Be careful so that you have your fingers caught
in the turning platen roller.