Sony KL-50W1 - Manual (Page 7)

7
GB
LANGUAGE
English
Deutsch
Français
Italiano
Español
Nederlands
Português
Suomi
Svenska
¶ Ł غÆ
Türkçe
and press OK
Sec
+
_ OK
Select
PROGR
PROGR
1
1
VTR 1-2-3 MDP
1 2
4 5
3
6
9 8 7
0 C
SAT
+ +
_ _
MENU
+
_
OK
+
_
RM-838
USE MEM
RESET
Step 2 Tuning in to TV Stations
Once you have set up the TV, you can choose the language of the
menu. Then, you should preset the channels (up to 100 channels)
by choosing either the automatic or manual method. The
automatic method is easier if you want to preset all receivable
channels at once. Use the manual method if you only have a few
channels and want to preset channels one by one.
Before you begin
• Check that the Full-Function side of the Remote Commander is
visible.
• Locate Menu operation buttons on the Remote Commander.
They are shaded in the illustration at the left.
Choose a language
1 Press
φ
on the TV.
The TV will switch on. If the standby indicator on the TV is lit, press
Ο
or a number button on the Remote Commander.
2 Press the MENU button.
The LANGUAGE menu appears. (See Fig. 1.)
3 Select the language you want with
>
+ or
?
– and press OK.
Display the menu
Press MENU.
The main menu appears. (See Fig. 2.)
Using
>
+ or
?
– select the symbol and press OK.
Now, choose one of the methods described overleaf:
“Preset Channels Automatically”
or
“Preset Channels Manually”
MENU
To go back to main
menu
Keep pressing
≅
.
To go back to the
normal TV picture
Press MENU. Normal
TV picture will be
restored after one
minute if menu functions
are not selected.
Note on the Demo
function
If you choose Demo in
the Installation menu,
you can see a sequential
demonstration of the
menu functions.
Press MENU to stop the
function.
1
2
1
2
φ
Fig. 2
Fig. 1
Auto Format
Select and press OK
Clip Board
PAP
Strobe
Screen Position
Screen Mode
[off]
[off]
[on]
[ ]
[ ] zoom
0
SCREEN MODE