beautypg.com

Teletext, Direct access functions, Switching teletext on and off – Sony KL-50W1 User Manual

Page 20: Selecting a teletext page, Preventing a teletext page from being updated, Using fastext

background image

20

GB

PROGR

PROGR

1

1

VTR 1-2-3 MDP

1

2

4

5

3

6

9

8

7

0

C

SAT

+

+

_

_

MENU

+

_

OK

+

_

RM-838

USE

MEM

RESET

Note
Teletext errors may
occur if the broadcasting
signals are weak.

With the simple side of
the Remote
Commander
You can switch teletext
on and off, operate
Fastext, and directly
select page numbers.

Note
Fastext operation is only
possible, if the TV station
broadcasts Fastext
signals.

Teletext

TV stations broadcast an information service called Teletext via
the TV channels.Teletext service allows you to receive various
information pages such as weather reports or news at any time
you want. For advanced teletext operation, use the buttons on the
Full-Function side of the Remote Commander.

Direct Access Functions

Switching Teletext on and off

1

Select the TV channel which carries the teletext broadcast you
want to watch.

2

Press

_

to switch on teletext.

A teletext page will be displayed (usually the index page).
If there is no teletext broadcast, “No text available” is displayed on
the information line at the top of the screen.

To switch teletext off

Press

Ο

.

Selecting a teletext page

With direct page selection

Use the number buttons to input the three digits of the chosen
page number.
If you have made a mistake, type in any three digits. Then re-enter
the correct page number.

With page-catching

1

Select a teletext page with a page overview (e.g. index page).

2

Press OK. Using

>

+ or

?

–, select the desired page. “Page

Catching” will be displayed on the information line. Press OK.
The requested page will appear in a few seconds.
Press

_

to resume normal teletext reception.

Accessing next or preceding page

Press g (PAGE+) or G (PAGE-).
The next or preceding page appears.

Superimposing the teletext display on the TV programme

Press

_

once in teletext mode or twice in TV mode.

Press

_

again to resume normal teletext reception.

Preventing a teletext page from being updated

Press

[

(HOLD). The HOLD symbol “

[

” is displayed on the

information line.

Press

_

to resume normal teletext reception.

Using Fastext

With Fastext you can access pages with one key stroke.
When a Fastext page is broadcast, a colour-coded menu will
appear at the bottom of the screen. The colours of this menu
correspond to the red, green, yellow and blue buttons on the
Remote Commander.
Press the corresponding coloured button on the Remote
Commander which corresponds to the colour-coded menu. The
page will be displayed after a few seconds.

This manual is related to the following products: