StarTech.com STARVIEW SV441DUSBI - Manual (Page 32)

Instruction Manual
27
Accessing KVM Features
Once you can access and configure the networking component of the Server Remote
Control, you can use it to select and control the managed computers connected to it.
This section describes how to use the on-screen display (OSD) system to manage your
computers. Once you have established a VNC session with the IP KVM, you can access
the KVM features as though you were at a local console.
KVM Switch OSD Operation
To enter the Hotkey Menu, press the left key twice within two seconds.
• L-CTRL is the key located on the left side of the keyboard.
• 1~8/A~H are the number keys 1-8 located in the upper row of the keyboard, and
the character keys A-H (not case sensitive).
Please Note: Do not use the keypad at the right of the keyboard.
To enter the KVM Menu, press the key three times within two seconds. Once
entered, the menu will display a list of the connected computers with corresponding
port numbers, names, and statuses, as shown below.