SMC Networks BARRICADETM N SMCWBR11S-3GN - Manual (Page 39)

C HAPTER 4 | Initial Configuration
Setup Wizard
– 39 –
addresses. To specify a DNS server, type the IP addresses in the text
field provided. Otherwise, leave the text field blank.
◆ Secondary DNS Server — The IP address of the Secondary Domain
Name Server.
S TEP 3 - WAN
S ETTINGS - S TATIC IP
Configures a static IP for the WAN port.
Figure 17: Wizard Step 3 - WAN Settings - Static IP
The following items are displayed on this page:
◆ Ethernet Port — Select “Static (Fixed IP)” for the WAN port connection
from the drop-down list.
■
Enable MAC Clone — Some ISPs limit Internet connections to a
specified MAC address. This setting allows you to manually change
the MAC address of the Mini 3G Broadband Router's WAN interface
to match the PC's MAC address provided to your ISP for
registration. You can enter the registered MAC address manually by
typing it in the boxes provided. Otherwise, connect only the PC with
the registered MAC address to the Mini 3G Broadband Router, then
click the “Clone your PC’s MAC Address.” (Default: Disable)
◆ USB Port — Enables support for a WAN connection using a USB 3G
modem. For more information, see “Step 3 - WAN Settings - 3G” on
page 45 . (Default: Disabled)
◆ IP Address — The IP address of the Mini 3G Broadband Router. Valid
IP addresses consist of four decimal numbers, 0 to 255, separated by
periods.
◆ Subnet Mask — The mask that identifies the host address bits used for
routing to specific subnets.