SMC Networks BARRICADETM N SMCWBR11S-3GN - Manual (Page 24)

C HAPTER 1 | Introduction
Hardware Description
– 24 –
LED I NDICATORS
The Mini 3G Broadband Router includes four status LED indicators, as
described in the following figure and table.
Figure 3: LEDs
Table 2: LED Behavior
LED Status Description
Power On Blue The unit is receiving power and is operating normally.
Off There is no power currently being supplied to the
unit.
WLAN On/Blinking Blue The 802.11n radio is enabled and
transmitting or receiving data through wireless links.
Off The 802.11n radio is disabled.
WAN On Blue The Ethernet WAN port is aquiring an IP address.
Blinking The Ethernet WAN port is connected and is
transmitting/receiving data.
Off The Ethernet WAN port is disconnected or has
malfunctioned.
LAN On Blue The Ethernet LAN port is connected to a PC or server.
Blinking The Ethernet port is connected and is transmitting or
receiving data.
Off The Ethernet port is disconnected or has
malfunctioned.
3G USB On Blue A 3G connection has been established.
Slow Blinking A 3G connection is in progress.
Fast Blinking The wrong 3G PIN code has been entered, or the 3G
budget limit has been reached.
5 Blinks Cycle The 3G pre-limit budget has been reached.
Off There is no modem connected to the 3G USB port, or
the device has failed.
WLAN LAN WAN Power
WPS SET
3G USB
LAN WLAN Power WAN 3G USB