SMC Networks BARRICADETM N SMCWBR11S-3GN - Manual (Page 25)

C HAPTER 1 | Introduction
Hardware Description
– 25 –
E THERNET WAN P ORT
A 100BASE-TX RJ-45 port that can be attached to an Internet access
device, such as a DSL or Cable modem.
E THERNET LAN P ORT
The Mini 3G Broadband Router has one 100BASE-TX RJ-45 port that can be
attached directly to a PC or 10BASE-T/100BASE-TX LAN segments.
This port supports automatic MDI/MDI-X operation, so you can use
straight-through cables for all network connections to PCs, switches, or
hubs.
3G M ODEM USB
P ORT
The 3G Modem USB Port supports connection to a wireless cellular 3G or
3.5G modem for broadband Internet access.
P OWER C ONNECTOR
The Mini 3G Broadband Router must be powered with its supplied power
adapter. Failure to do so results in voiding of any warrantly supplied with
the product. The power adapter automatically adjusts to any voltage
between 100~240 volts at 50 or 60 Hz, and supplies 12 volts DC power to
the unit. No voltage range settings are required.
WPS B UTTON
Press the WPS button to automatically configure the Mini 3G Broadband
Router with other WPS devices in the WLAN.
R ESET B UTTON
The Reset button is used to restore the factory default configuration. If you
hold down the button for 5 seconds or more, any configuration changes
you may have made are removed, and the factory default configuration is
restored to the Mini 3G Broadband Router.
Figure 4: Bottom Panel
Reset Button